{
  "application": {
    "name": "ColorNavigator 7",
    "win.x86_64": {
      "version": "7.2.9.4",
      "url": "https://www.eizoglobal.com/support/db/files/software/software/graphics/colornavigator7/CN729_Setup.exe",
      "options": {
        "updateHistory": {
          "de": [
            {
              "version": "7.2.9.4",
              "description": [
                "Add following as supported model.",
                "・CG3200X",
                "Improved application UI."
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "Add following as supported model.",
                "・CS3200X",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Added support for selecting color matching functions (CIE 1931 / CIE 1964) in Advanced mode calibration (supported measurement devices only).",
                "Improved application UX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "End support Windows 10 (64bit).",
                "Supported Photoshop 2026 as the color patch viewer of CMYK-type validation."
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "Add following as supported models.",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "Add following model as supported measurement device.",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "Add following as supported models.",
                "・CG3100X",
                "Add following model as supported measurement device.",
                "・Datacolor Spyder",
                "End of support for the following models.",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "Add following as supported models.",
                "・CG2400S",
                "Add following model as supported measurement device.",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "Changed to allow the setting of measurement value correction on a per-sensor basis (only selectable for certain sensors).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "Add following as supported models.",
                "・PROMINENCE CG1",
                "Add following model as supported measurement device.",
                "・TOPCON SR-5 / SR-5A",
                "Supported Photoshop 2025 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "Add following model as supported measurement device.",
                "・EX5",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "Added ColorNavigator API feature.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "Add following model as supported measurement device.",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "Supported Photoshop 2024 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "Add following model as supported measurement device.",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "End of support for the following models.",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "Added ColorNavigator API feature (Public Beta)",
                "Fixed an issue where the template name data from ColorNavigator Network was not being retained.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "Add following as supported models.",
                "・CS2400R",
                "Added a feature that verify if the connection has been established successfully when setting up ColorNavigator Network connection.",
                "Fixed a problem that unsupported sensors were being made available under certain condition.",
                "Fixed a problem that application would terminate unexpectedly when load a monitor setting file and target file that created in ColorNavigator NX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "Add following as supported models.",
                "・CS2400S",
                "Add following model as supported measurement device.",
                "・Spectraval 1511",
                "Supported illuminance measurement with MYIRO-1.",
                "Supported Photoshop 2023 as the color patch viewer of CMYK-type validation.",
                "End of support for old sensor.",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "Fixed a problem that color patch bit value in validation report is always displayed as 8bit value.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "Fix a problem that the displaying position of window is invalid when use same model monitor in multi monitor in Windows environment.",
                "Fix a problem that cannot use SpyderX / EX4 in some Windows environments."
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "End of support for old sensor.",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "Change the brightness value of preset target.",
                "With the changed application architecture to 64-bit, the software installation location will be changed.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "Changed so that adjustment target name can be used as ICC profile name.",
                "Added a feature that can delete calibration target from main window.",
                "Improved the monitoring function of monitor settings and input signal in ColorNavigator Agent.",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "Add following as supported models.",
                "・CG2700S",
                "Add following model as supported measurement device.",
                "・MYIRO-1",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "Change not to display the warning message when launch Quick Color Match while ColorNavigator Agent is running.",
                "Add a feature that to use specified measurement device to each function.",
                "Support following as supported model in ColorNavigator Network.",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "Support Windows 11.",
                "End support Windows 8.1 and Windows 10 (32bit).",
                "Supported Photoshop 2022 as the color patch viewer of CMYK-type validation.",
                "Fix a problem that adjustment information may not be synchronized in some monitors."
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "Support some ColorEdge CS series in ColorNavigator Network.",
                "Supported the '.cube' file as the applicable format of LogViewLUT emulation function.",
                "Supported to apply the different ICC profile policy to each target.",
                "Fixed a problem that ColorNavigator 7 cannot be launched after installation.",
                "Fixed a problem that not recognized SR-UL1R."
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "Improved the adjustment accuracy of Standard mode calibration on CG3146.",
                "Improved UI.",
                "Support to send monitor setting of 'LUT' target gamma from ColorNavigator Network.",
                "Fixed a problem that the validation result may be at unexpected value.",
                "Fixed a problem that added language packs were removed when updating the application."
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "Add following model as supported measurement device.",
                "・i1Pro 3",
                "Removed following model from supported measurement device.",
                "・CA-210",
                "Fixed a problem that i1 Studio was not detected in some Windows environments.",
                "Fixed a problem that SpyderX / EX4 was not detected in some Windows environments."
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "Improved UI.",
                "Fixed a problem that sometimes failed to export monitor setting.",
                "Fixed a problem that cannot be set up for CMYK validation on Windows when select Adobe Acrobat as the viewer software.",
                "Changed the application help to PDF format."
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "Add following as supported models.",
                "・CG3146",
                "・CS2740-X",
                "Fixed a problem that sometimes failed to correlate build-in sensor.",
                "Fixed a problem that the application was terminated incorrectly when read a specific ICC profile.",
                "Fixed a problem that sometimes application terminated incorrectly while calibration.",
                "Fixed a problem that color gamut information of ICC profile might not be correct.",
                "Add following as supported measurement device.",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "Improve measurement accuracy of i1 Display 3/i1 Display Pro.",
                "Support EX3/Spyder5 and K-10/K-10A in macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "Fixed a problem that imported calibration target using 'Export/Import monitor settings' extension are to be reset."
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "Fixed a problem that data access error could occurs in certain situation."
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "Add device emulation and profile emulation function as extension functions. (Win/Mac)",
                "Update UI."
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "Add following models as supported measurement device.",
                "・SpyderX /EX4",
                "・CA-410",
                "Remove the limitation of reference  measurement device in build-in sensor correlation in following models.",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously. (Linux)",
                "ColorNavigator Network connection function is now available even in under the authentication proxy environment."
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "Add monitor settings export/import function as an extension function.",
                "Fix a problem that ICC profile cannot be updated under some conditions.",
                "Display a message if the application is unusable due to another user is already using the application.",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously.",
                "Rename 'Import/Export configuration' to 'Import/Export Preferences'.",
                "Fix a problem that the manual adjustment result of CN6 cannot be correctly imported.",
                "Fix file extension of calibration target file (cntarget -> cn7target).",
                "Add following models as supported models.",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "Fixed the problem where target data cannot correctly be read from the monitor."
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Supported Photoshop CC 2019 in CMYK Validation.",
                "Fixed a problem that profile setting error is repeatedly displayed.",
                "Add following models as supported models.",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "Improved UI.",
                "Fixed a problem that SelfCalibration setting set from ColorNavigator is overwritten by OSD operation.",
                "Fixed a problem that the date and time of SelfCalibration result in OSD menu is overwritten with the time of the main window of ColorNavigator is closed.",
                "Fixed a problem that calibration result is displayed in duplicate in calibration history window."
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "Modify small bugs.",
                "Add following models as supported models.",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "First release"
              ]
            }
          ],
          "en": [
            {
              "version": "7.2.9.4",
              "description": [
                "Add following as supported model.",
                "・CG3200X",
                "Improved application UI."
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "Add following as supported model.",
                "・CS3200X",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Added support for selecting color matching functions (CIE 1931 / CIE 1964) in Advanced mode calibration (supported measurement devices only).",
                "Improved application UX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "End support Windows 10 (64bit).",
                "Supported Photoshop 2026 as the color patch viewer of CMYK-type validation."
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "Add following as supported models.",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "Add following model as supported measurement device.",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "Add following as supported models.",
                "・CG3100X",
                "Add following model as supported measurement device.",
                "・Datacolor Spyder",
                "End of support for the following models.",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "Add following as supported models.",
                "・CG2400S",
                "Add following model as supported measurement device.",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "Changed to allow the setting of measurement value correction on a per-sensor basis (only selectable for certain sensors).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "Add following as supported models.",
                "・PROMINENCE CG1",
                "Add following model as supported measurement device.",
                "・TOPCON SR-5 / SR-5A",
                "Supported Photoshop 2025 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "Add following model as supported measurement device.",
                "・EX5",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "Added ColorNavigator API feature.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "Add following model as supported measurement device.",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "Supported Photoshop 2024 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "Add following model as supported measurement device.",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "End of support for the following models.",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "Added ColorNavigator API feature (Public Beta)",
                "Fixed an issue where the template name data from ColorNavigator Network was not being retained.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "Add following as supported models.",
                "・CS2400R",
                "Added a feature that verify if the connection has been established successfully when setting up ColorNavigator Network connection.",
                "Fixed a problem that unsupported sensors were being made available under certain condition.",
                "Fixed a problem that application would terminate unexpectedly when load a monitor setting file and target file that created in ColorNavigator NX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "Add following as supported models.",
                "・CS2400S",
                "Add following model as supported measurement device.",
                "・Spectraval 1511",
                "Supported illuminance measurement with MYIRO-1.",
                "Supported Photoshop 2023 as the color patch viewer of CMYK-type validation.",
                "End of support for old sensor.",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "Fixed a problem that color patch bit value in validation report is always displayed as 8bit value.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "Fix a problem that the displaying position of window is invalid when use same model monitor in multi monitor in Windows environment.",
                "Fix a problem that cannot use SpyderX / EX4 in some Windows environments."
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "End of support for old sensor.",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "Change the brightness value of preset target.",
                "With the changed application architecture to 64-bit, the software installation location will be changed.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "Changed so that adjustment target name can be used as ICC profile name.",
                "Added a feature that can delete calibration target from main window.",
                "Improved the monitoring function of monitor settings and input signal in ColorNavigator Agent.",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "Add following as supported models.",
                "・CG2700S",
                "Add following model as supported measurement device.",
                "・MYIRO-1",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "Change not to display the warning message when launch Quick Color Match while ColorNavigator Agent is running.",
                "Add a feature that to use specified measurement device to each function.",
                "Support following as supported model in ColorNavigator Network.",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "Support Windows 11.",
                "End support Windows 8.1 and Windows 10 (32bit).",
                "Supported Photoshop 2022 as the color patch viewer of CMYK-type validation.",
                "Fix a problem that adjustment information may not be synchronized in some monitors."
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "Support some ColorEdge CS series in ColorNavigator Network.",
                "Supported the '.cube' file as the applicable format of LogViewLUT emulation function.",
                "Supported to apply the different ICC profile policy to each target.",
                "Fixed a problem that ColorNavigator 7 cannot be launched after installation.",
                "Fixed a problem that not recognized SR-UL1R."
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "Improved the adjustment accuracy of Standard mode calibration on CG3146.",
                "Improved UI.",
                "Support to send monitor setting of 'LUT' target gamma from ColorNavigator Network.",
                "Fixed a problem that the validation result may be at unexpected value.",
                "Fixed a problem that added language packs were removed when updating the application."
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "Add following model as supported measurement device.",
                "・i1Pro 3",
                "Removed following model from supported measurement device.",
                "・CA-210",
                "Fixed a problem that i1 Studio was not detected in some Windows environments.",
                "Fixed a problem that SpyderX / EX4 was not detected in some Windows environments."
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "Improved UI.",
                "Fixed a problem that sometimes failed to export monitor setting.",
                "Fixed a problem that cannot be set up for CMYK validation on Windows when select Adobe Acrobat as the viewer software.",
                "Changed the application help to PDF format."
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "Add following as supported models.",
                "・CG3146",
                "・CS2740-X",
                "Fixed a problem that sometimes failed to correlate build-in sensor.",
                "Fixed a problem that the application was terminated incorrectly when read a specific ICC profile.",
                "Fixed a problem that sometimes application terminated incorrectly while calibration.",
                "Fixed a problem that color gamut information of ICC profile might not be correct.",
                "Add following as supported measurement device.",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "Improve measurement accuracy of i1 Display 3/i1 Display Pro.",
                "Support EX3/Spyder5 and K-10/K-10A in macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "Fixed a problem that imported calibration target using 'Export/Import monitor settings' extension are to be reset."
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "Fixed a problem that data access error could occurs in certain situation."
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "Add device emulation and profile emulation function as extension functions. (Win/Mac)",
                "Update UI."
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "Add following models as supported measurement device.",
                "・SpyderX /EX4",
                "・CA-410",
                "Remove the limitation of reference  measurement device in build-in sensor correlation in following models.",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously. (Linux)",
                "ColorNavigator Network connection function is now available even in under the authentication proxy environment."
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "Add monitor settings export/import function as an extension function.",
                "Fix a problem that ICC profile cannot be updated under some conditions.",
                "Display a message if the application is unusable due to another user is already using the application.",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously.",
                "Rename 'Import/Export configuration' to 'Import/Export Preferences'.",
                "Fix a problem that the manual adjustment result of CN6 cannot be correctly imported.",
                "Fix file extension of calibration target file (cntarget -> cn7target).",
                "Add following models as supported models.",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "Fixed the problem where target data cannot correctly be read from the monitor."
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Supported Photoshop CC 2019 in CMYK Validation.",
                "Fixed a problem that profile setting error is repeatedly displayed.",
                "Add following models as supported models.",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "Improved UI.",
                "Fixed a problem that SelfCalibration setting set from ColorNavigator is overwritten by OSD operation.",
                "Fixed a problem that the date and time of SelfCalibration result in OSD menu is overwritten with the time of the main window of ColorNavigator is closed.",
                "Fixed a problem that calibration result is displayed in duplicate in calibration history window."
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "Modify small bugs.",
                "Add following models as supported models.",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "First release"
              ]
            }
          ],
          "ja": [
            {
              "version": "7.2.9.4",
              "description": [
                "サポート機種として以下を追加。",
                "・CG3200X",
                "アプリケーションのUIを改善。"
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "サポート機種として以下を追加。",
                "・CS3200X",
                "アプリケーションのUIを改善",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Advancedモードのキャリブレーションで等色関数（CIE 1931 / 1964）の選択に対応（対象の測定器のみ）。",
                "アプリケーションのUXを改善",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "Windows 10 (64bit) のサポートを終了",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2026をサポート。"
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "サポートセンサーとして以下の機種を追加。",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CG3100X",
                "サポートセンサーとして以下の機種を追加。",
                "・Datacolor Spyder",
                "以下のモニターのサポートを終了",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2400S",
                "サポートセンサーとして以下の機種を追加。",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "測定値補正をセンサー単位で設定できるように変更。(対象センサーのみ)",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "サポート機種として以下を追加。",
                "・PROMINENCE CG1",
                "サポートセンサーとして以下の機種を追加。",
                "・TOPCON SR-5 / SR-5A",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2025をサポート。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・EX5",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "ColorNavigator API機能を追加。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2024をサポート。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "以下の機種のサポートを終了。",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "ColorNavigator API機能 (Public Beta) を追加",
                "ColorNavigator Networkから送信したテンプレート名が保持されていなかった不具合を修正",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CS2400R",
                "ColorNavigator Networkとの接続設定を行う際に接続できているかを確認する機能を追加",
                "非サポートのセンサーが使用可能になってしまう場合があった不具合を修正",
                "ColorNavigator NXで作成したモニター設定ファイルや目標ファイルを読み込むとアプリケーションが不正終了してしまっていた問題を修正",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "サポート機種として以下を追加。",
                "・CS2400S",
                "サポートセンサーとして以下の機種を追加。",
                "・Spectraval 1511",
                "MYIRO-1での照度測定に対応。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2023をサポート。",
                "旧センサーの対応を終了。",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "検証結果のカラーパッチのビット数が常に8bit表記となっていた不具合を修正。",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "Windows環境において同一機種をマルチモニターで使用した際に、ウィンドウの表示位置がずれる場合があった不具合を修正",
                "Windowsの一部の環境において、SpyderX / EX4が使用できなかった不具合を修正"
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "旧センサーの対応を終了",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "プリセット目標の輝度を変更",
                "64bitアプリケーションへの変更に伴い、インストール先を変更",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "目標名をICCプロファイル名として使用する機能を追加",
                "メインウィンドウから目標を削除する機能を追加",
                "サポートセンサーとして以下の機種を追加。",
                "ColorNavigator Agentの入力信号の設定監視機能を改善",
                "アプリケーションのUIを改善",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2700S",
                "サポートセンサーとして以下の機種を追加。",
                "・MYIRO-1",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "ColorNavigator 7を常駐させた状態でQuick Color Matchを起動した際に表示されるメッセージを停止。",
                "機能毎に指定した測定器を使用するように設定できる機能を追加。",
                " ColorNavigator Networkにて以下の機種をサポート。",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "Windows 11に対応。",
                "Windows 8.1並びにWindows 10 (32bit) のサポートを終了。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2022をサポート。",
                "一部のモニターで調整状態の同期が行えない場合があった問題を修正。"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "一部の機種において機種名を正しく取得できない不具合を修正。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "ColorNavigator Networkにて一部のColorEdge CSシリーズをサポート。",
                "LogViewLUTエミュレーション機能にて.cube形式のファイルをサポート。",
                "目標ごとの ICC プロファイルポリシー設定をサポート。",
                "一部の環境にてインストール完了後にColorNavigator 7をの起動に失敗する不具合を修正。",
                "TOPCON SR-UL1Rセンサーを認識できない場合があった不具合を修正。"
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "CG3146でのStandardモードキャリブレーションの調整精度向上。",
                "UIを改善。",
                "ColorNavigator Networkから目標ガンマが「LUT」のモニター設定を送信できるように変更。",
                "検証結果が予期しない値になる不具合を修正。"
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・i1Pro 3",
                "サポートセンサーから以下の機種を削除。",
                "・CA-210",
                "Windowsにてi1 Studioの検出に失敗する場合があった不具合を修正。",
                "WindowsにてSpyderX / EX4の検出に失敗する場合があった不具合を修正。"
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "UIを改善。",
                "モニター設定のエクスポートに失敗してしまう場合がある不具合を修正。",
                "WindowsにてCMYK検証を実施する際、ビューアーソフトにAdobe Acrobatを指定すると校正設定ができない不具合を修正。",
                "アプリケーションのヘルプをPDF形式に変更。"
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "サポート機種として以下を追加",
                "・CG3146",
                "・CS2740-X",
                "内蔵センサーのコレレーションに失敗する場合がある不具合を修正",
                "特定のICCプロファイルを読み込んだ場合にアプリケーションが終了してしまう不具合を修正",
                "キャリブレーション中にCN7が不正終了してしまう場合がある不具合を修正",
                "ICCプロファイルの色域情報に書き込む値が適切でない場合がある不具合を修正",
                "サポートセンサーとして以下を追加。",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "i1 Display 3/i1 Display Proの測定精度を改善。",
                "macOS Catalina (10.15) にてEX3/Spyder5, K-10/K-10Aに対応"
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "拡張機能「モニター設定のエクスポート/インポート」を使用してモニター設定をインポートすると、目標がリセットされる不具合を修正"
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "データアクセスエラーが発生する不具合を修正。"
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "拡張機能にデバイスエミュレーション、プロファイルエミュレーション機能を追加。(Win/Mac)",
                "UIを改善。"
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・SpyderX / EX4",
                "・CA-410",
                "以下の機種において、内蔵センサーコレレーション時における利用可能な測定器の制限を撤廃。",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Agent起動状態での複数ユーザーの同時利用ができるように修正。(Linux)",
                "ColorNavigator Network接続機能を認証プロキシ下でも使用できるように改善。"
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "拡張機能にモニター設定のエクスポート/インポート機能を追加。",
                "ICCプロファイルを更新できない問題へ対応。",
                "別ユーザーが使用中の場合、エラーメッセージを表示。",
                "Agent起動状態での複数のユーザーの同時利用ができるように修正。",
                "「設定のインポート/エクスポート」を「環境設定のインポート/エクスポート」に変更。",
                "ColorNavigator 6の手動調整結果が引き継がれない問題を修正。",
                "目標エクスポート時のファイル拡張子を修正 (cntarget -> cn7target)。",
                "サポート機種として以下の機種を追加。",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "モニターから目標を正しく読み込めない場合がある問題を修正。",
                "サポート機種として以下の機種を追加。",
                "・CS2410"
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Photoshop CC 2019でのCMYK検証に対応。",
                "常駐時にプロファイル設定エラーが繰り返し表示される問題を修正。",
                "サポート機種として以下の機種を追加。",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "UIを改善。",
                "ColorNavigatorから設定したSelfCalibrationの設定がOSDの操作によって置き換わる不具合を修正。",
                "OSDの調整日時がColorNavigatorのメインウィンドウを閉じた時刻になる問題を修正。",
                "調整履歴に結果が重複して表示される問題を修正。"
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "軽微な不具合を修正。",
                "サポート機種として以下の機種を追加。",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "初回リリース"
              ]
            }
          ],
          "zh": [
            {
              "version": "7.2.9.4",
              "description": [
                "增加支持下记型号显示器：",
                "・CG3200X",
                "改善程序用户界面。"
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "增加支持下记型号显示器：",
                "・CS3200X",
                "改善程序用户界面。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Advanced类型的色彩模式校准中支持选择色彩匹配函数（CIE 1931 / CIE 1964，仅限支持的测定器）。",
                "改善应用的用户体验。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "停止支持Windows 10 (64bit)。",
                "支持Photoshop 2026做为CMYK验证用的颜色查看器。"
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "增加支持下记型号显示器：",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "增加支持下记型号测量设备：",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "增加支持下记型号显示器：",
                "・CG3100X",
                "增加支持下记型号测量设备：",
                "・Datacolor Spyder",
                "终止对旧款显示器的支持。",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "增加支持下记型号显示器：",
                "·CG2400S",
                "增加支持下记型号测量设备：",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "支持按照测量设备型号设定测量值补偿种类。(仅支持对象测量设备)",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "增加支持下记型号显示器：",
                "・PROMINENCE CG1",
                "增加支持下记型号测量设备：",
                "・TOPCON SR-5 / SR-5A",
                "支持Photoshop 2025做为CMYK验证用的颜色查看器。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "增加支持下记型号测量设备：",
                "·EX5",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "新增ColorNavigator API功能。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "增加支持下记型号测量设备：",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "支持Photoshop 2024做为CMYK验证用的颜色查看器。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "增加支持下记型号测量设备：",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "终止对旧款显示器的支持。",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "新增ColorNavigator API功能（公测版）",
                "修复了从ColorNavigator Network发送的模板名称未被保留的问题。",
                "修复了一些小问题。"
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "增加支持下记型号显示器：",
                "・CS2400R",
                "增加确认ColorNavigator Network的连接设定是否正确的功能。",
                "修复某些情况下非支持测定器可能被会被使用的错误。",
                "修复读取某些ColorNavigator NX做成的显示器设定文件时程序崩溃的问题。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "增加支持下记型号显示器：",
                "・CS2400S",
                "增加支持下记型号测量设备：",
                "・Spectraval 1511",
                "支持MYIRO-1的照度测量功能",
                "支持Photoshop 2023做为CMYK验证用的颜色查看器。",
                "终止支持旧测量设备：",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "修复验证结果报告中始终用8位数值表示颜色的问题。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "修正当使用多个同型号显示器时主窗口位置偏移的问题。",
                "修正在部分Windows环境中SpyderX / EX4无法使用的问题。"
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "终止支持旧测量设备：",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "变更预置目标的亮度。",
                "变更为64位应用程序的同时变更安装目录。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "增加支持使用目标名做为ICC配置文件名的功能。",
                "增加从主窗口删除目标的功能。",
                "改进ColorNavigator Agent的输入信号监视功能。",
                "改善程序用户界面。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "增加支持下记型号显示器：",
                "·CG2700S",
                "增加支持下记型号测量设备：",
                "·MYIRO-1",
                "·ColorChecker Display Pro / Plus",
                "·ColorChecker Studio",
                "ColorNavigator Agent状态下，当 Quick Color Match启动时不再显示警告。",
                "增加可以为每种功能指定测量设备的功能。",
                "ColorNavigator Network里增加支持下列型号：",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "支持Windows 11。",
                "终止支持Windows 8.1和32位Windows 10。",
                "支持Photoshop 2022做为CMYK验证用的颜色查看器。",
                "修正部分显示器无法正确同步校正状态的问题。"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "轻微缺陷的修正。"
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "添加部分ColorEdge CS显示器支持ColorNavigator Network。",
                "LogViewLUT仿真功能中支持.cube文件格式。",
                "支持对各调整目标个别设定ICC profile政策。",
                "修正部分环境下ColorNavigator 7安装后起动失败的问题。",
                "修复不能识别TOPCON SR-UL1R测定器的问题。"
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "改善CG3146的Standard Mode校准精度。",
                "改善UI。",
                "支持从ColorNavigator Network设定LUT形式的伽马目标。",
                "修正一些情况下出现非预期验证结果的错误。",
                "修正当应用更新时已安装的语言包被卸载的错误。"
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "增加支持下记型号测量设备：",
                "・i1Pro 3",
                "移除支持下记型号测量设备：",
                "・CA-210",
                "修复某些Windows环境下无法检测出 i1 Studio的错误。",
                "修复某些Windows环境下无法检测出SpyderX / EX4 的错误。"
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "UI改善。",
                "修正某些情况下显示器设定导出错误问题。",
                "修正Windows系统下无法为CMYK验证正确设置Adobe Acrobat的问题。",
                "将软件帮助文档更换为PDF格式。"
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "增加支持下记型号显示器：",
                "·CG3146",
                "·CS2740-X",
                "修正了某些情况下内置传感器相关校正失败的错误。",
                "修正了读取特定ICC配置文件时程序崩溃的错误。",
                "修正了某些情况下调整过程中程序崩溃的错误。",
                "修正了某些场合ICC配置文件色域信息不正确的错误。",
                "增加支持下记型号测量设备：",
                "·i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "改善i1 Display 3/i1 Display Pro的测量精度。",
                "EX3/Spyder5 and K-10/K-10A 支持macOS Catalina (10.15)。"
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "修复使用导出/导入显示器设置扩展功能导入显示器设置时目标被重置的问题。"
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "修正某些情况下的数据访问错误。"
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "在扩展功能中增加设备仿真和ICC配置文件仿真功能。(Win/Mac)",
                "用户界面更新。"
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "增加支持以下测量设备",
                "・SpyderX / EX4",
                "・CA-410",
                "移除下列显示器的内置传感器相关校正的参考设备的限制",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "允许多用户同时使用ColorNavigator7 Agent。(Linux)",
                "支持在使用认证代理网络环境下使用ColorNavigator Network功能。"
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "在扩展功能中追加显示器设定导入/导出功能。",
                "修正某些情况下ICC配置文件不能更新的问题。",
                "当其他用户正在使用本软件时，显示错误信息。",
                "允许多用户同时使用ColorNavigator7 Agent。",
                "“设置的导入/导出”功能更名为“环境设置的导入/导出”。",
                "修正不能正确导入CN6手动调整结果的问题。",
                "修正调整目标导出文件的扩展名 (cntarget ⇒ cn7target)。",
                "追加支持以下型号。",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "修正部分情况下无法从显示器中正确读取目标的问题"
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "添加了对Photoshop CC 2019的CMYK验证的支持。",
                "修正了一个程序常驻时反复显示总览设置的错误的问题。",
                "增加支持以下型号。",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "用户体验改善。",
                "ColorNavigator的SelfCalibration设置有可能被OSD操作更改的问题修正。",
                "ColorNavigator的主窗口的关闭时间被设置为OSD上的调整时间的问题修正。",
                "调整履历里调整结果重复表示的问题修正。"
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "轻微的漏洞修复。",
                "增加支持以下型号。",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "初版发布"
              ]
            }
          ]
        },
        "os": ["Windows 11"]
      }
    },
    "win.x86": {
      "version": "7.2.9.4",
      "url": "https://www.eizoglobal.com/support/db/files/software/software/graphics/colornavigator7/CN729_Setup.exe",
      "options": {
        "updateHistory": {
          "de": [
            {
              "version": "7.2.9.4",
              "description": [
                "Add following as supported model.",
                "・CG3200X",
                "Improved application UI."
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "Add following as supported model.",
                "・CS3200X",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Added support for selecting color matching functions (CIE 1931 / CIE 1964) in Advanced mode calibration (supported measurement devices only).",
                "Improved application UX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "End support Windows 10 (64bit).",
                "Supported Photoshop 2026 as the color patch viewer of CMYK-type validation."
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "Add following as supported models.",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "Add following model as supported measurement device.",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "Add following as supported models.",
                "・CG3100X",
                "Add following model as supported measurement device.",
                "・Datacolor Spyder",
                "End of support for the following models.",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "Add following as supported models.",
                "・CG2400S",
                "Add following model as supported measurement device.",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "Changed to allow the setting of measurement value correction on a per-sensor basis (only selectable for certain sensors).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "Add following as supported models.",
                "・PROMINENCE CG1",
                "Add following model as supported measurement device.",
                "・TOPCON SR-5 / SR-5A",
                "Supported Photoshop 2025 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "Add following model as supported measurement device.",
                "・EX5",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "Added ColorNavigator API feature.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "Add following model as supported measurement device.",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "Supported Photoshop 2024 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "Add following model as supported measurement device.",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "End of support for the following models.",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "Added ColorNavigator API feature (Public Beta)",
                "Fixed an issue where the template name data from ColorNavigator Network was not being retained.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "Add following as supported models.",
                "・CS2400R",
                "Added a feature that verify if the connection has been established successfully when setting up ColorNavigator Network connection.",
                "Fixed a problem that unsupported sensors were being made available under certain condition.",
                "Fixed a problem that application would terminate unexpectedly when load a monitor setting file and target file that created in ColorNavigator NX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "Add following as supported models.",
                "・CS2400S",
                "Add following model as supported measurement device.",
                "・Spectraval 1511",
                "Supported illuminance measurement with MYIRO-1.",
                "Supported Photoshop 2023 as the color patch viewer of CMYK-type validation.",
                "End of support for old sensor.",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "Fixed a problem that color patch bit value in validation report is always displayed as 8bit value.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "Fix a problem that the displaying position of window is invalid when use same model monitor in multi monitor in Windows environment.",
                "Fix a problem that cannot use SpyderX / EX4 in some Windows environments."
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "End of support for old sensor.",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "Change the brightness value of preset target.",
                "With the changed application architecture to 64-bit, the software installation location will be changed.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "Changed so that adjustment target name can be used as ICC profile name.",
                "Added a feature that can delete calibration target from main window.",
                "Improved the monitoring function of monitor settings and input signal in ColorNavigator Agent.",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "Add following as supported models.",
                "・CG2700S",
                "Add following model as supported measurement device.",
                "・MYIRO-1",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "Change not to display the warning message when launch Quick Color Match while ColorNavigator Agent is running.",
                "Add a feature that to use specified measurement device to each function.",
                "Support following as supported model in ColorNavigator Network.",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "Support Windows 11.",
                "End support Windows 8.1 and Windows 10 (32bit).",
                "Supported Photoshop 2022 as the color patch viewer of CMYK-type validation.",
                "Fix a problem that adjustment information may not be synchronized in some monitors."
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "Support some ColorEdge CS series in ColorNavigator Network.",
                "Supported the '.cube' file as the applicable format of LogViewLUT emulation function.",
                "Supported to apply the different ICC profile policy to each target.",
                "Fixed a problem that ColorNavigator 7 cannot be launched after installation.",
                "Fixed a problem that not recognized SR-UL1R."
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "Improved the adjustment accuracy of Standard mode calibration on CG3146.",
                "Improved UI.",
                "Support to send monitor setting of 'LUT' target gamma from ColorNavigator Network.",
                "Fixed a problem that the validation result may be at unexpected value.",
                "Fixed a problem that added language packs were removed when updating the application."
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "Add following model as supported measurement device.",
                "・i1Pro 3",
                "Removed following model from supported measurement device.",
                "・CA-210",
                "Fixed a problem that i1 Studio was not detected in some Windows environments.",
                "Fixed a problem that SpyderX / EX4 was not detected in some Windows environments."
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "Improved UI.",
                "Fixed a problem that sometimes failed to export monitor setting.",
                "Fixed a problem that cannot be set up for CMYK validation on Windows when select Adobe Acrobat as the viewer software.",
                "Changed the application help to PDF format."
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "Add following as supported models.",
                "・CG3146",
                "・CS2740-X",
                "Fixed a problem that sometimes failed to correlate build-in sensor.",
                "Fixed a problem that the application was terminated incorrectly when read a specific ICC profile.",
                "Fixed a problem that sometimes application terminated incorrectly while calibration.",
                "Fixed a problem that color gamut information of ICC profile might not be correct.",
                "Add following as supported measurement device.",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "Improve measurement accuracy of i1 Display 3/i1 Display Pro.",
                "Support EX3/Spyder5 and K-10/K-10A in macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "Fixed a problem that imported calibration target using 'Export/Import monitor settings' extension are to be reset."
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "Fixed a problem that data access error could occurs in certain situation."
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "Add device emulation and profile emulation function as extension functions. (Win/Mac)",
                "Update UI."
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "Add following models as supported measurement device.",
                "・SpyderX /EX4",
                "・CA-410",
                "Remove the limitation of reference  measurement device in build-in sensor correlation in following models.",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously. (Linux)",
                "ColorNavigator Network connection function is now available even in under the authentication proxy environment."
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "Add monitor settings export/import function as an extension function.",
                "Fix a problem that ICC profile cannot be updated under some conditions.",
                "Display a message if the application is unusable due to another user is already using the application.",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously.",
                "Rename 'Import/Export configuration' to 'Import/Export Preferences'.",
                "Fix a problem that the manual adjustment result of CN6 cannot be correctly imported.",
                "Fix file extension of calibration target file (cntarget -> cn7target).",
                "Add following models as supported models.",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "Fixed the problem where target data cannot correctly be read from the monitor."
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Supported Photoshop CC 2019 in CMYK Validation.",
                "Fixed a problem that profile setting error is repeatedly displayed.",
                "Add following models as supported models.",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "Improved UI.",
                "Fixed a problem that SelfCalibration setting set from ColorNavigator is overwritten by OSD operation.",
                "Fixed a problem that the date and time of SelfCalibration result in OSD menu is overwritten with the time of the main window of ColorNavigator is closed.",
                "Fixed a problem that calibration result is displayed in duplicate in calibration history window."
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "Modify small bugs.",
                "Add following models as supported models.",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "First release"
              ]
            }
          ],
          "en": [
            {
              "version": "7.2.9.4",
              "description": [
                "Add following as supported model.",
                "・CG3200X",
                "Improved application UI."
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "Add following as supported model.",
                "・CS3200X",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Added support for selecting color matching functions (CIE 1931 / CIE 1964) in Advanced mode calibration (supported measurement devices only).",
                "Improved application UX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "End support Windows 10 (64bit).",
                "Supported Photoshop 2026 as the color patch viewer of CMYK-type validation."
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "Add following as supported models.",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "Add following model as supported measurement device.",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "Add following as supported models.",
                "・CG3100X",
                "Add following model as supported measurement device.",
                "・Datacolor Spyder",
                "End of support for the following models.",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "Add following as supported models.",
                "・CG2400S",
                "Add following model as supported measurement device.",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "Changed to allow the setting of measurement value correction on a per-sensor basis (only selectable for certain sensors).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "Add following as supported models.",
                "・PROMINENCE CG1",
                "Add following model as supported measurement device.",
                "・TOPCON SR-5 / SR-5A",
                "Supported Photoshop 2025 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "Add following model as supported measurement device.",
                "・EX5",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "Added ColorNavigator API feature.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "Add following model as supported measurement device.",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "Supported Photoshop 2024 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "Add following model as supported measurement device.",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "End of support for the following models.",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "Added ColorNavigator API feature (Public Beta)",
                "Fixed an issue where the template name data from ColorNavigator Network was not being retained.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "Add following as supported models.",
                "・CS2400R",
                "Added a feature that verify if the connection has been established successfully when setting up ColorNavigator Network connection.",
                "Fixed a problem that unsupported sensors were being made available under certain condition.",
                "Fixed a problem that application would terminate unexpectedly when load a monitor setting file and target file that created in ColorNavigator NX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "Add following as supported models.",
                "・CS2400S",
                "Add following model as supported measurement device.",
                "・Spectraval 1511",
                "Supported illuminance measurement with MYIRO-1.",
                "Supported Photoshop 2023 as the color patch viewer of CMYK-type validation.",
                "End of support for old sensor.",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "Fixed a problem that color patch bit value in validation report is always displayed as 8bit value.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "Fix a problem that the displaying position of window is invalid when use same model monitor in multi monitor in Windows environment.",
                "Fix a problem that cannot use SpyderX / EX4 in some Windows environments."
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "End of support for old sensor.",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "Change the brightness value of preset target.",
                "With the changed application architecture to 64-bit, the software installation location will be changed.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "Changed so that adjustment target name can be used as ICC profile name.",
                "Added a feature that can delete calibration target from main window.",
                "Improved the monitoring function of monitor settings and input signal in ColorNavigator Agent.",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "Add following as supported models.",
                "・CG2700S",
                "Add following model as supported measurement device.",
                "・MYIRO-1",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "Change not to display the warning message when launch Quick Color Match while ColorNavigator Agent is running.",
                "Add a feature that to use specified measurement device to each function.",
                "Support following as supported model in ColorNavigator Network.",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "Support Windows 11.",
                "End support Windows 8.1 and Windows 10 (32bit).",
                "Supported Photoshop 2022 as the color patch viewer of CMYK-type validation.",
                "Fix a problem that adjustment information may not be synchronized in some monitors."
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "Support some ColorEdge CS series in ColorNavigator Network.",
                "Supported the '.cube' file as the applicable format of LogViewLUT emulation function.",
                "Supported to apply the different ICC profile policy to each target.",
                "Fixed a problem that ColorNavigator 7 cannot be launched after installation.",
                "Fixed a problem that not recognized SR-UL1R."
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "Improved the adjustment accuracy of Standard mode calibration on CG3146.",
                "Improved UI.",
                "Support to send monitor setting of 'LUT' target gamma from ColorNavigator Network.",
                "Fixed a problem that the validation result may be at unexpected value.",
                "Fixed a problem that added language packs were removed when updating the application."
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "Add following model as supported measurement device.",
                "・i1Pro 3",
                "Removed following model from supported measurement device.",
                "・CA-210",
                "Fixed a problem that i1 Studio was not detected in some Windows environments.",
                "Fixed a problem that SpyderX / EX4 was not detected in some Windows environments."
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "Improved UI.",
                "Fixed a problem that sometimes failed to export monitor setting.",
                "Fixed a problem that cannot be set up for CMYK validation on Windows when select Adobe Acrobat as the viewer software.",
                "Changed the application help to PDF format."
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "Add following as supported models.",
                "・CG3146",
                "・CS2740-X",
                "Fixed a problem that sometimes failed to correlate build-in sensor.",
                "Fixed a problem that the application was terminated incorrectly when read a specific ICC profile.",
                "Fixed a problem that sometimes application terminated incorrectly while calibration.",
                "Fixed a problem that color gamut information of ICC profile might not be correct.",
                "Add following as supported measurement device.",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "Improve measurement accuracy of i1 Display 3/i1 Display Pro.",
                "Support EX3/Spyder5 and K-10/K-10A in macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "Fixed a problem that imported calibration target using 'Export/Import monitor settings' extension are to be reset."
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "Fixed a problem that data access error could occurs in certain situation."
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "Add device emulation and profile emulation function as extension functions. (Win/Mac)",
                "Update UI."
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "Add following models as supported measurement device.",
                "・SpyderX /EX4",
                "・CA-410",
                "Remove the limitation of reference  measurement device in build-in sensor correlation in following models.",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously. (Linux)",
                "ColorNavigator Network connection function is now available even in under the authentication proxy environment."
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "Add monitor settings export/import function as an extension function.",
                "Fix a problem that ICC profile cannot be updated under some conditions.",
                "Display a message if the application is unusable due to another user is already using the application.",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously.",
                "Rename 'Import/Export configuration' to 'Import/Export Preferences'.",
                "Fix a problem that the manual adjustment result of CN6 cannot be correctly imported.",
                "Fix file extension of calibration target file (cntarget -> cn7target).",
                "Add following models as supported models.",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "Fixed the problem where target data cannot correctly be read from the monitor."
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Supported Photoshop CC 2019 in CMYK Validation.",
                "Fixed a problem that profile setting error is repeatedly displayed.",
                "Add following models as supported models.",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "Improved UI.",
                "Fixed a problem that SelfCalibration setting set from ColorNavigator is overwritten by OSD operation.",
                "Fixed a problem that the date and time of SelfCalibration result in OSD menu is overwritten with the time of the main window of ColorNavigator is closed.",
                "Fixed a problem that calibration result is displayed in duplicate in calibration history window."
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "Modify small bugs.",
                "Add following models as supported models.",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "First release"
              ]
            }
          ],
          "ja": [
            {
              "version": "7.2.9.4",
              "description": [
                "サポート機種として以下を追加。",
                "・CG3200X",
                "アプリケーションのUIを改善。"
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "サポート機種として以下を追加。",
                "・CS3200X",
                "アプリケーションのUIを改善",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Advancedモードのキャリブレーションで等色関数（CIE 1931 / 1964）の選択に対応（対象の測定器のみ）。",
                "アプリケーションのUXを改善",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "Windows 10 (64bit) のサポートを終了",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2026をサポート。"
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "サポートセンサーとして以下の機種を追加。",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CG3100X",
                "サポートセンサーとして以下の機種を追加。",
                "・Datacolor Spyder",
                "以下のモニターのサポートを終了",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2400S",
                "サポートセンサーとして以下の機種を追加。",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "測定値補正をセンサー単位で設定できるように変更。(対象センサーのみ)",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "サポート機種として以下を追加。",
                "・PROMINENCE CG1",
                "サポートセンサーとして以下の機種を追加。",
                "・TOPCON SR-5 / SR-5A",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2025をサポート。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・EX5",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "ColorNavigator API機能を追加。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2024をサポート。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "以下の機種のサポートを終了。",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "ColorNavigator API機能 (Public Beta) を追加",
                "ColorNavigator Networkから送信したテンプレート名が保持されていなかった不具合を修正",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CS2400R",
                "ColorNavigator Networkとの接続設定を行う際に接続できているかを確認する機能を追加",
                "非サポートのセンサーが使用可能になってしまう場合があった不具合を修正",
                "ColorNavigator NXで作成したモニター設定ファイルや目標ファイルを読み込むとアプリケーションが不正終了してしまっていた問題を修正",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "サポート機種として以下を追加。",
                "・CS2400S",
                "サポートセンサーとして以下の機種を追加。",
                "・Spectraval 1511",
                "MYIRO-1での照度測定に対応。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2023をサポート。",
                "旧センサーの対応を終了。",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "検証結果のカラーパッチのビット数が常に8bit表記となっていた不具合を修正。",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "Windows環境において同一機種をマルチモニターで使用した際に、ウィンドウの表示位置がずれる場合があった不具合を修正",
                "Windowsの一部の環境において、SpyderX / EX4が使用できなかった不具合を修正"
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "旧センサーの対応を終了",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "プリセット目標の輝度を変更",
                "64bitアプリケーションへの変更に伴い、インストール先を変更",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "目標名をICCプロファイル名として使用する機能を追加",
                "メインウィンドウから目標を削除する機能を追加",
                "サポートセンサーとして以下の機種を追加。",
                "ColorNavigator Agentの入力信号の設定監視機能を改善",
                "アプリケーションのUIを改善",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2700S",
                "サポートセンサーとして以下の機種を追加。",
                "・MYIRO-1",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "ColorNavigator 7を常駐させた状態でQuick Color Matchを起動した際に表示されるメッセージを停止。",
                "機能毎に指定した測定器を使用するように設定できる機能を追加。",
                " ColorNavigator Networkにて以下の機種をサポート。",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "Windows 11に対応。",
                "Windows 8.1並びにWindows 10 (32bit) のサポートを終了。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2022をサポート。",
                "一部のモニターで調整状態の同期が行えない場合があった問題を修正。"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "一部の機種において機種名を正しく取得できない不具合を修正。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "ColorNavigator Networkにて一部のColorEdge CSシリーズをサポート。",
                "LogViewLUTエミュレーション機能にて.cube形式のファイルをサポート。",
                "目標ごとの ICC プロファイルポリシー設定をサポート。",
                "一部の環境にてインストール完了後にColorNavigator 7をの起動に失敗する不具合を修正。",
                "TOPCON SR-UL1Rセンサーを認識できない場合があった不具合を修正。"
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "CG3146でのStandardモードキャリブレーションの調整精度向上。",
                "UIを改善。",
                "ColorNavigator Networkから目標ガンマが「LUT」のモニター設定を送信できるように変更。",
                "検証結果が予期しない値になる不具合を修正。"
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・i1Pro 3",
                "サポートセンサーから以下の機種を削除。",
                "・CA-210",
                "Windowsにてi1 Studioの検出に失敗する場合があった不具合を修正。",
                "WindowsにてSpyderX / EX4の検出に失敗する場合があった不具合を修正。"
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "UIを改善。",
                "モニター設定のエクスポートに失敗してしまう場合がある不具合を修正。",
                "WindowsにてCMYK検証を実施する際、ビューアーソフトにAdobe Acrobatを指定すると校正設定ができない不具合を修正。",
                "アプリケーションのヘルプをPDF形式に変更。"
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "サポート機種として以下を追加",
                "・CG3146",
                "・CS2740-X",
                "内蔵センサーのコレレーションに失敗する場合がある不具合を修正",
                "特定のICCプロファイルを読み込んだ場合にアプリケーションが終了してしまう不具合を修正",
                "キャリブレーション中にCN7が不正終了してしまう場合がある不具合を修正",
                "ICCプロファイルの色域情報に書き込む値が適切でない場合がある不具合を修正",
                "サポートセンサーとして以下を追加。",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "i1 Display 3/i1 Display Proの測定精度を改善。",
                "macOS Catalina (10.15) にてEX3/Spyder5, K-10/K-10Aに対応"
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "拡張機能「モニター設定のエクスポート/インポート」を使用してモニター設定をインポートすると、目標がリセットされる不具合を修正"
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "データアクセスエラーが発生する不具合を修正。"
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "拡張機能にデバイスエミュレーション、プロファイルエミュレーション機能を追加。(Win/Mac)",
                "UIを改善。"
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・SpyderX / EX4",
                "・CA-410",
                "以下の機種において、内蔵センサーコレレーション時における利用可能な測定器の制限を撤廃。",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Agent起動状態での複数ユーザーの同時利用ができるように修正。(Linux)",
                "ColorNavigator Network接続機能を認証プロキシ下でも使用できるように改善。"
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "拡張機能にモニター設定のエクスポート/インポート機能を追加。",
                "ICCプロファイルを更新できない問題へ対応。",
                "別ユーザーが使用中の場合、エラーメッセージを表示。",
                "Agent起動状態での複数のユーザーの同時利用ができるように修正。",
                "「設定のインポート/エクスポート」を「環境設定のインポート/エクスポート」に変更。",
                "ColorNavigator 6の手動調整結果が引き継がれない問題を修正。",
                "目標エクスポート時のファイル拡張子を修正 (cntarget -> cn7target)。",
                "サポート機種として以下の機種を追加。",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "モニターから目標を正しく読み込めない場合がある問題を修正。",
                "サポート機種として以下の機種を追加。",
                "・CS2410"
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Photoshop CC 2019でのCMYK検証に対応。",
                "常駐時にプロファイル設定エラーが繰り返し表示される問題を修正。",
                "サポート機種として以下の機種を追加。",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "UIを改善。",
                "ColorNavigatorから設定したSelfCalibrationの設定がOSDの操作によって置き換わる不具合を修正。",
                "OSDの調整日時がColorNavigatorのメインウィンドウを閉じた時刻になる問題を修正。",
                "調整履歴に結果が重複して表示される問題を修正。"
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "軽微な不具合を修正。",
                "サポート機種として以下の機種を追加。",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "初回リリース"
              ]
            }
          ],
          "zh": [
            {
              "version": "7.2.9.4",
              "description": [
                "增加支持下记型号显示器：",
                "・CG3200X",
                "改善程序用户界面。"
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "增加支持下记型号显示器：",
                "・CS3200X",
                "改善程序用户界面。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Advanced类型的色彩模式校准中支持选择色彩匹配函数（CIE 1931 / CIE 1964，仅限支持的测定器）。",
                "改善应用的用户体验。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "停止支持Windows 10 (64bit)。",
                "支持Photoshop 2026做为CMYK验证用的颜色查看器。"
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "增加支持下记型号显示器：",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "增加支持下记型号测量设备：",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "增加支持下记型号显示器：",
                "・CG3100X",
                "增加支持下记型号测量设备：",
                "・Datacolor Spyder",
                "终止对旧款显示器的支持。",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "增加支持下记型号显示器：",
                "·CG2400S",
                "增加支持下记型号测量设备：",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "支持按照测量设备型号设定测量值补偿种类。(仅支持对象测量设备)",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "增加支持下记型号显示器：",
                "・PROMINENCE CG1",
                "增加支持下记型号测量设备：",
                "・TOPCON SR-5 / SR-5A",
                "支持Photoshop 2025做为CMYK验证用的颜色查看器。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "增加支持下记型号测量设备：",
                "·EX5",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "新增ColorNavigator API功能。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "增加支持下记型号测量设备：",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "支持Photoshop 2024做为CMYK验证用的颜色查看器。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "增加支持下记型号测量设备：",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "终止对旧款显示器的支持。",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "新增ColorNavigator API功能（公测版）",
                "修复了从ColorNavigator Network发送的模板名称未被保留的问题。",
                "修复了一些小问题。"
              ]
            },
            {
              "version": "7.1.11.6",
              "description": [
                "增加支持下记型号显示器：",
                "・CS2400R",
                "增加确认ColorNavigator Network的连接设定是否正确的功能。",
                "修复某些情况下非支持测定器可能被会被使用的错误。",
                "修复读取某些ColorNavigator NX做成的显示器设定文件时程序崩溃的问题。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "增加支持下记型号显示器：",
                "・CS2400S",
                "增加支持下记型号测量设备：",
                "・Spectraval 1511",
                "支持MYIRO-1的照度测量功能",
                "支持Photoshop 2023做为CMYK验证用的颜色查看器。",
                "终止支持旧测量设备：",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "修复验证结果报告中始终用8位数值表示颜色的问题。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.9.19",
              "description": [
                "修正当使用多个同型号显示器时主窗口位置偏移的问题。",
                "修正在部分Windows环境中SpyderX / EX4无法使用的问题。"
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "终止支持旧测量设备：",
                "・Spyder4 / EX2",
                "・DISCUS",
                "・SR-3",
                "变更预置目标的亮度。",
                "变更为64位应用程序的同时变更安装目录。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "增加支持使用目标名做为ICC配置文件名的功能。",
                "增加从主窗口删除目标的功能。",
                "改进ColorNavigator Agent的输入信号监视功能。",
                "改善程序用户界面。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "增加支持下记型号显示器：",
                "·CG2700S",
                "增加支持下记型号测量设备：",
                "·MYIRO-1",
                "·ColorChecker Display Pro / Plus",
                "·ColorChecker Studio",
                "ColorNavigator Agent状态下，当 Quick Color Match启动时不再显示警告。",
                "增加可以为每种功能指定测量设备的功能。",
                "ColorNavigator Network里增加支持下列型号：",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.6.3",
              "description": [
                "支持Windows 11。",
                "终止支持Windows 8.1和32位Windows 10。",
                "支持Photoshop 2022做为CMYK验证用的颜色查看器。",
                "修正部分显示器无法正确同步校正状态的问题。"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "轻微缺陷的修正。"
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "添加部分ColorEdge CS显示器支持ColorNavigator Network。",
                "LogViewLUT仿真功能中支持.cube文件格式。",
                "支持对各调整目标个别设定ICC profile政策。",
                "修正部分环境下ColorNavigator 7安装后起动失败的问题。",
                "修复不能识别TOPCON SR-UL1R测定器的问题。"
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "改善CG3146的Standard Mode校准精度。",
                "改善UI。",
                "支持从ColorNavigator Network设定LUT形式的伽马目标。",
                "修正一些情况下出现非预期验证结果的错误。",
                "修正当应用更新时已安装的语言包被卸载的错误。"
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "增加支持下记型号测量设备：",
                "・i1Pro 3",
                "移除支持下记型号测量设备：",
                "・CA-210",
                "修复某些Windows环境下无法检测出 i1 Studio的错误。",
                "修复某些Windows环境下无法检测出SpyderX / EX4 的错误。"
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "UI改善。",
                "修正某些情况下显示器设定导出错误问题。",
                "修正Windows系统下无法为CMYK验证正确设置Adobe Acrobat的问题。",
                "将软件帮助文档更换为PDF格式。"
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "增加支持下记型号显示器：",
                "·CG3146",
                "·CS2740-X",
                "修正了某些情况下内置传感器相关校正失败的错误。",
                "修正了读取特定ICC配置文件时程序崩溃的错误。",
                "修正了某些情况下调整过程中程序崩溃的错误。",
                "修正了某些场合ICC配置文件色域信息不正确的错误。",
                "增加支持下记型号测量设备：",
                "·i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "改善i1 Display 3/i1 Display Pro的测量精度。",
                "EX3/Spyder5 and K-10/K-10A 支持macOS Catalina (10.15)。"
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "修复使用导出/导入显示器设置扩展功能导入显示器设置时目标被重置的问题。"
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "修正某些情况下的数据访问错误。"
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "在扩展功能中增加设备仿真和ICC配置文件仿真功能。(Win/Mac)",
                "用户界面更新。"
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "增加支持以下测量设备",
                "・SpyderX / EX4",
                "・CA-410",
                "移除下列显示器的内置传感器相关校正的参考设备的限制",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "允许多用户同时使用ColorNavigator7 Agent。(Linux)",
                "支持在使用认证代理网络环境下使用ColorNavigator Network功能。"
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "在扩展功能中追加显示器设定导入/导出功能。",
                "修正某些情况下ICC配置文件不能更新的问题。",
                "当其他用户正在使用本软件时，显示错误信息。",
                "允许多用户同时使用ColorNavigator7 Agent。",
                "“设置的导入/导出”功能更名为“环境设置的导入/导出”。",
                "修正不能正确导入CN6手动调整结果的问题。",
                "修正调整目标导出文件的扩展名 (cntarget ⇒ cn7target)。",
                "追加支持以下型号。",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "修正部分情况下无法从显示器中正确读取目标的问题"
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "添加了对Photoshop CC 2019的CMYK验证的支持。",
                "修正了一个程序常驻时反复显示总览设置的错误的问题。",
                "增加支持以下型号。",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "用户体验改善。",
                "ColorNavigator的SelfCalibration设置有可能被OSD操作更改的问题修正。",
                "ColorNavigator的主窗口的关闭时间被设置为OSD上的调整时间的问题修正。",
                "调整履历里调整结果重复表示的问题修正。"
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "轻微的漏洞修复。",
                "增加支持以下型号。",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "初版发布"
              ]
            }
          ]
        },
        "os": ["Windows 11"]
      }
    },
    "mac": {
      "version": "7.2.9.6",
      "url": "https://www.eizoglobal.com/support/db/files/software/software/graphics/colornavigator7/ColorNavigator729B.pkg",
      "options": {
        "updateHistory": {
          "de": [
            {
              "version": "7.2.9.6",
              "description": [
                "Support macOS 27 Golden Gate.",
                "End support macOS Ventura 13."
              ]
            },
            {
              "version": "7.2.9.4",
              "description": [
                "Add following as supported model.",
                "・CG3200X",
                "Improved application UI."
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "Add following as supported model.",
                "・CS3200X",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Added support for selecting color matching functions (CIE 1931 / CIE 1964) in Advanced mode calibration (supported measurement devices only).",
                "Improved application UX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "Support macOS Tahoe (26).",
                "End support macOS Monterey (12).",
                "Supported Photoshop 2026 as the color patch viewer of CMYK-type validation."
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "Add following as supported models.",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "Add following model as supported measurement device.",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "Add following as supported models.",
                "・CG3100X",
                "Add following model as supported measurement device.",
                "・Datacolor Spyder",
                "End of support for the following models.",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "Add following as supported models.",
                "・CG2400S",
                "Add following model as supported measurement device.",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "Changed to allow the setting of measurement value correction on a per-sensor basis (only selectable for certain sensors).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "Add following as supported models.",
                "・PROMINENCE CG1",
                "Add following model as supported measurement device.",
                "・TOPCON SR-5 / SR-5A",
                "Support macOS Sequoia (15).",
                "End support macOS Big Sur (11).",
                "Supported Photoshop 2025 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "Add following model as supported measurement device.",
                "・EX5",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "Added ColorNavigator API feature.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "Add following model as supported measurement device.",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "Supported Photoshop 2024 as the color patch viewer of CMYK-type validation.",
                "End support macOS Catalina (10.15).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "Add following model as supported measurement device.",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "End of support for the following models.",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "Added ColorNavigator API feature (Public Beta)",
                "Fixed an issue where the template name data from ColorNavigator Network was not being retained.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.11.8",
              "description": [
                "Add following as supported models.",
                "・CS2400R",
                "Added a feature that verify if the connection has been established successfully when setting up ColorNavigator Network connection.",
                "Support Mac with Apple M2 Pro chip.",
                "Fixed a problem that unsupported sensors were being made available under certain condition.",
                "Fixed a problem that application would terminate unexpectedly when load a monitor setting file and target file that created in ColorNavigator NX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "Add following as supported models.",
                "・CS2400S",
                "Add following model as supported measurement device.",
                "・Spectraval 1511",
                "Supported illuminance measurement with MYIRO-1.",
                "Supported Photoshop 2023 as the color patch viewer of CMYK-type validation.",
                "End support macOS Mojave (10.14).",
                "End of support for old sensor.",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "Fixed a problem that color patch bit value in validation report is always displayed as 8bit value.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "End of support for old sensor.",
                "・Spyder4 / EX2",
                "・DISCUS",
                "Change the brightness value of preset target.",
                "Native support for Apple Silicon Macs. But some calibration sensors that do not yet natively support Mac computers with Apple silicon.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "Changed so that adjustment target name can be used as ICC profile name.",
                "Added a feature that can delete calibration target from main window.",
                "Improved the monitoring function of monitor settings and input signal in ColorNavigator Agent.",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "Add following as supported models.",
                "・CG2700S",
                "Add following model as supported measurement device.",
                "・MYIRO-1 (macOS 12 (Monterey) is not supported)",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "Change not to display the warning message when launch Quick Color Match while ColorNavigator Agent is running.",
                "Add a feature that to use specified measurement device to each function.",
                "Supported Photoshop 2022 as the color patch viewer of CMYK-type validation.",
                "End support macOS High Sierra (10.13).",
                "Fix a problem that adjustment information may not be synchronized in some monitors.",
                "Fix a problem that main window is sometimes not shown when close some wizard window.",
                "Support following as supported model in ColorNavigator Network.",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "Support some ColorEdge CS series in ColorNavigator Network.",
                "Supported the '.cube' file as the applicable format of LogViewLUT emulation function.",
                "Supported to apply the different ICC profile policy to each target.",
                "Fixed a problem that ColorNavigator 7 cannot be launched after installation.",
                "Fixed a problem that not recognized SR-UL1R."
              ]
            },
            {
              "version": "7.1.3.2",
              "description": [
                "End support macOS Sierra (10.12).",
                "Supported Photoshop 2021 as the color patch viewer of CMYK-type validation.",
                "End support following software as the color patch viewer of CMYK-type validation.",
                "・Photoshop CC 2018",
                "・Photoshop CC 2017",
                "・Photoshop CC 2015.5",
                "・Photoshop CC 2015",
                "・Photoshop CS6",
                "Fixed a problem that Monitor detection fails in a multi-tier environment using a docking station or USB hub."
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "Improved the adjustment accuracy of Standard mode calibration on CG3146.",
                "Improved UI.",
                "Support to send monitor setting of 'LUT' target gamma from ColorNavigator Network.",
                "Fixed a problem that the validation result may be at unexpected value.",
                "Fixed a problem that added language packs were removed when updating the application."
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "Add following model as supported measurement device.",
                "・i1Pro 3",
                "Removed following model from supported measurement device.",
                "・CA-210",
                "Fixed a problem that i1 Studio was not detected in some Windows environments.",
                "Fixed a problem that SpyderX / EX4 was not detected in some Windows environments."
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "Improved UI.",
                "Fixed a problem that sometimes failed to export monitor setting.",
                "Fixed a problem that cannot be set up for CMYK validation on Windows when select Adobe Acrobat as the viewer software.",
                "Changed the application help to PDF format."
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "Add following as supported models.",
                "・CG3146",
                "・CS2740-X",
                "Fixed a problem that sometimes failed to correlate build-in sensor.",
                "Fixed a problem that the application was terminated incorrectly when read a specific ICC profile.",
                "Fixed a problem that sometimes application terminated incorrectly while calibration.",
                "Fixed a problem that color gamut information of ICC profile might not be correct.",
                "Add following as supported measurement device.",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "Improve measurement accuracy of i1 Display 3/i1 Display Pro.",
                "Support EX3/Spyder5 and K-10/K-10A in macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "Fixed a problem that imported calibration target using 'Export/Import monitor settings' extension are to be reset."
              ]
            },
            {
              "version": "7.0.7.5",
              "description": [
                "Fixed a problem that i1 Display 3/i1 Display Pro cannot be used on macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "Fixed a problem that data access error could occurs in certain situation."
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "Add device emulation and profile emulation function as extension functions. (Win/Mac)",
                "Update UI."
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "Add following models as supported measurement device.",
                "・SpyderX /EX4",
                "・CA-410",
                "Remove the limitation of reference  measurement device in build-in sensor correlation in following models.",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously. (Linux)",
                "ColorNavigator Network connection function is now available even in under the authentication proxy environment."
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "Add monitor settings export/import function as an extension function.",
                "Fix a problem that ICC profile cannot be updated under some conditions.",
                "Display a message if the application is unusable due to another user is already using the application.",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously.",
                "Rename 'Import/Export configuration' to 'Import/Export Preferences'.",
                "Fix a problem that the manual adjustment result of CN6 cannot be correctly imported.",
                "Fix file extension of calibration target file (cntarget -> cn7target).",
                "Add following models as supported models.",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "Fixed the problem where target data cannot correctly be read from the monitor.",
                "Add uninstall tools."
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Supported Photoshop CC 2019 in CMYK Validation.",
                "Fixed a problem that profile setting error is repeatedly displayed.",
                "Add following models as supported models.",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "Improved UI.",
                "Fixed a problem that SelfCalibration setting set from ColorNavigator is overwritten by OSD operation.",
                "Fixed a problem that the date and time of SelfCalibration result in OSD menu is overwritten with the time of the main window of ColorNavigator is closed.",
                "Fixed a problem that calibration result is displayed in duplicate in calibration history window."
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "Modify small bugs.",
                "Add following models as supported models.",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "First release"
              ]
            }
          ],
          "en": [
            {
              "version": "7.2.9.6",
              "description": [
                "Support macOS 27 Golden Gate.",
                "End support macOS Ventura 13."
              ]
            },
            {
              "version": "7.2.9.4",
              "description": [
                "Add following as supported model.",
                "・CG3200X",
                "Improved application UI."
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "Add following as supported model.",
                "・CS3200X",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Added support for selecting color matching functions (CIE 1931 / CIE 1964) in Advanced mode calibration (supported measurement devices only).",
                "Improved application UX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "Support macOS Tahoe (26).",
                "End support macOS Monterey (12).",
                "Supported Photoshop 2026 as the color patch viewer of CMYK-type validation."
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "Add following as supported models.",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "Add following model as supported measurement device.",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "Add following as supported models.",
                "・CG3100X",
                "Add following model as supported measurement device.",
                "・Datacolor Spyder",
                "End of support for the following models.",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "Add following as supported models.",
                "・CG2400S",
                "Add following model as supported measurement device.",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "Changed to allow the setting of measurement value correction on a per-sensor basis (only selectable for certain sensors).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "Add following as supported models.",
                "・PROMINENCE CG1",
                "Add following model as supported measurement device.",
                "・TOPCON SR-5 / SR-5A",
                "Support macOS Sequoia (15).",
                "End support macOS Big Sur (11).",
                "Supported Photoshop 2025 as the color patch viewer of CMYK-type validation.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "Add following model as supported measurement device.",
                "・EX5",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "Added ColorNavigator API feature.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "Add following model as supported measurement device.",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "Supported Photoshop 2024 as the color patch viewer of CMYK-type validation.",
                "End support macOS Catalina (10.15).",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "Add following model as supported measurement device.",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "End of support for the following models.",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "Added ColorNavigator API feature (Public Beta)",
                "Fixed an issue where the template name data from ColorNavigator Network was not being retained.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.11.8",
              "description": [
                "Add following as supported models.",
                "・CS2400R",
                "Added a feature that verify if the connection has been established successfully when setting up ColorNavigator Network connection.",
                "Support Mac with Apple M2 Pro chip.",
                "Fixed a problem that unsupported sensors were being made available under certain condition.",
                "Fixed a problem that application would terminate unexpectedly when load a monitor setting file and target file that created in ColorNavigator NX.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "Add following as supported models.",
                "・CS2400S",
                "Add following model as supported measurement device.",
                "・Spectraval 1511",
                "Supported illuminance measurement with MYIRO-1.",
                "Supported Photoshop 2023 as the color patch viewer of CMYK-type validation.",
                "End support macOS Mojave (10.14).",
                "End of support for old sensor.",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "Fixed a problem that color patch bit value in validation report is always displayed as 8bit value.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "End of support for old sensor.",
                "・Spyder4 / EX2",
                "・DISCUS",
                "Change the brightness value of preset target.",
                "Native support for Apple Silicon Macs. But some calibration sensors that do not yet natively support Mac computers with Apple silicon.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "Changed so that adjustment target name can be used as ICC profile name.",
                "Added a feature that can delete calibration target from main window.",
                "Improved the monitoring function of monitor settings and input signal in ColorNavigator Agent.",
                "Improved application UI.",
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "Add following as supported models.",
                "・CG2700S",
                "Add following model as supported measurement device.",
                "・MYIRO-1 (macOS 12 (Monterey) is not supported)",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "Change not to display the warning message when launch Quick Color Match while ColorNavigator Agent is running.",
                "Add a feature that to use specified measurement device to each function.",
                "Supported Photoshop 2022 as the color patch viewer of CMYK-type validation.",
                "End support macOS High Sierra (10.13).",
                "Fix a problem that adjustment information may not be synchronized in some monitors.",
                "Fix a problem that main window is sometimes not shown when close some wizard window.",
                "Support following as supported model in ColorNavigator Network.",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "Fixed some small problems."
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "Support some ColorEdge CS series in ColorNavigator Network.",
                "Supported the '.cube' file as the applicable format of LogViewLUT emulation function.",
                "Supported to apply the different ICC profile policy to each target.",
                "Fixed a problem that ColorNavigator 7 cannot be launched after installation.",
                "Fixed a problem that not recognized SR-UL1R."
              ]
            },
            {
              "version": "7.1.3.2",
              "description": [
                "End support macOS Sierra (10.12).",
                "Supported Photoshop 2021 as the color patch viewer of CMYK-type validation.",
                "End support following software as the color patch viewer of CMYK-type validation.",
                "・Photoshop CC 2018",
                "・Photoshop CC 2017",
                "・Photoshop CC 2015.5",
                "・Photoshop CC 2015",
                "・Photoshop CS6",
                "Fixed a problem that Monitor detection fails in a multi-tier environment using a docking station or USB hub."
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "Improved the adjustment accuracy of Standard mode calibration on CG3146.",
                "Improved UI.",
                "Support to send monitor setting of 'LUT' target gamma from ColorNavigator Network.",
                "Fixed a problem that the validation result may be at unexpected value.",
                "Fixed a problem that added language packs were removed when updating the application."
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "Add following model as supported measurement device.",
                "・i1Pro 3",
                "Removed following model from supported measurement device.",
                "・CA-210",
                "Fixed a problem that i1 Studio was not detected in some Windows environments.",
                "Fixed a problem that SpyderX / EX4 was not detected in some Windows environments."
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "Improved UI.",
                "Fixed a problem that sometimes failed to export monitor setting.",
                "Fixed a problem that cannot be set up for CMYK validation on Windows when select Adobe Acrobat as the viewer software.",
                "Changed the application help to PDF format."
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "Add following as supported models.",
                "・CG3146",
                "・CS2740-X",
                "Fixed a problem that sometimes failed to correlate build-in sensor.",
                "Fixed a problem that the application was terminated incorrectly when read a specific ICC profile.",
                "Fixed a problem that sometimes application terminated incorrectly while calibration.",
                "Fixed a problem that color gamut information of ICC profile might not be correct.",
                "Add following as supported measurement device.",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "Improve measurement accuracy of i1 Display 3/i1 Display Pro.",
                "Support EX3/Spyder5 and K-10/K-10A in macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "Fixed a problem that imported calibration target using 'Export/Import monitor settings' extension are to be reset."
              ]
            },
            {
              "version": "7.0.7.5",
              "description": [
                "Fixed a problem that i1 Display 3/i1 Display Pro cannot be used on macOS Catalina (10.15)."
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "Fixed a problem that data access error could occurs in certain situation."
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "Add device emulation and profile emulation function as extension functions. (Win/Mac)",
                "Update UI."
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "Add following models as supported measurement device.",
                "・SpyderX /EX4",
                "・CA-410",
                "Remove the limitation of reference  measurement device in build-in sensor correlation in following models.",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously. (Linux)",
                "ColorNavigator Network connection function is now available even in under the authentication proxy environment."
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "Add monitor settings export/import function as an extension function.",
                "Fix a problem that ICC profile cannot be updated under some conditions.",
                "Display a message if the application is unusable due to another user is already using the application.",
                "Allow multiple users to use the ColorNavigator7 Agent simultaneously.",
                "Rename 'Import/Export configuration' to 'Import/Export Preferences'.",
                "Fix a problem that the manual adjustment result of CN6 cannot be correctly imported.",
                "Fix file extension of calibration target file (cntarget -> cn7target).",
                "Add following models as supported models.",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "Fixed the problem where target data cannot correctly be read from the monitor.",
                "Add uninstall tools."
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Supported Photoshop CC 2019 in CMYK Validation.",
                "Fixed a problem that profile setting error is repeatedly displayed.",
                "Add following models as supported models.",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "Improved UI.",
                "Fixed a problem that SelfCalibration setting set from ColorNavigator is overwritten by OSD operation.",
                "Fixed a problem that the date and time of SelfCalibration result in OSD menu is overwritten with the time of the main window of ColorNavigator is closed.",
                "Fixed a problem that calibration result is displayed in duplicate in calibration history window."
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "Modify small bugs.",
                "Add following models as supported models.",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "First release"
              ]
            }
          ],
          "ja": [
            {
              "version": "7.2.9.6",
              "description": [
                "macOS 27 Golden Gate をサポート。",
                "macOS Ventura 13 のサポートを終了。"
              ]
            },
            {
              "version": "7.2.9.4",
              "description": [
                "サポート機種として以下を追加。",
                "・CG3200X",
                "アプリケーションのUIを改善。"
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "サポート機種として以下を追加。",
                "・CS3200X",
                "アプリケーションのUIを改善",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Advancedモードのキャリブレーションで等色関数（CIE 1931 / 1964）の選択に対応（対象の測定器のみ）。",
                "アプリケーションのUXを改善",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "macOS Tahoe (26) をサポート。",
                "macOS Monterey (12) のサポートを終了。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2026をサポート。"
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "サポートセンサーとして以下の機種を追加。",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CG3100X",
                "サポートセンサーとして以下の機種を追加。",
                "・Datacolor Spyder",
                "以下のモニターのサポートを終了",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2400S",
                "サポートセンサーとして以下の機種を追加。",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "測定値補正をセンサー単位で設定できるように変更。(対象センサーのみ)",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "サポート機種として以下を追加。",
                "・PROMINENCE CG1",
                "サポートセンサーとして以下の機種を追加。",
                "・TOPCON SR-5 / SR-5A",
                "macOS Sequoia (15) をサポート。",
                "macOS Big Sur (11) のサポートを終了。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2025をサポート。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・EX5",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "ColorNavigator API機能を追加。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2024をサポート。",
                "macOS Catalina (10.15) のサポートを終了。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "以下の機種のサポートを終了。",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "ColorNavigator API機能 (Public Beta) を追加",
                "ColorNavigator Networkから送信したテンプレート名が保持されていなかった不具合を修正",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.11.8",
              "description": [
                "サポート機種として以下を追加。",
                "・CS2400R",
                "ColorNavigator Networkとの接続設定を行う際に接続できているかを確認する機能を追加",
                "Apple M2 Proチップ搭載のMacに対応",
                "非サポートのセンサーが使用可能になってしまう場合があった不具合を修正",
                "ColorNavigator NXで作成したモニター設定ファイルや目標ファイルを読み込むとアプリケーションが不正終了してしまっていた問題を修正",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "サポート機種として以下を追加。",
                "・CS2400S",
                "サポートセンサーとして以下の機種を追加。",
                "・Spectraval 1511",
                "MYIRO-1での照度測定に対応。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2023をサポート。",
                "macOS Mojave (10.14) のサポートを終了",
                "旧センサーの対応を終了。",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "検証結果のカラーパッチのビット数が常に8bit表記となっていた不具合を修正。",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "旧センサーの対応を終了",
                "・Spyder4 / EX2",
                "・DISCUS",
                "プリセット目標の輝度を変更",
                "Apple シリコン搭載Macにネイティブ対応 (一部のサポートセンサーはネイティブ未対応のためRosettaで動作)",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "目標名をICCプロファイル名として使用する機能を追加",
                "メインウィンドウから目標を削除する機能を追加",
                "サポートセンサーとして以下の機種を追加。",
                "ColorNavigator Agentの入力信号の設定監視機能を改善",
                "アプリケーションのUIを改善",
                "軽微な不具合を修正"
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "サポート機種として以下を追加。",
                "・CG2700S",
                "サポートセンサーとして以下の機種を追加。",
                "・MYIRO-1 (macOS 12 (Monterey) は非対応)",
                "・ColorChecker Display Pro / Plus",
                "・ColorChecker Studio",
                "ColorNavigator 7を常駐させた状態でQuick Color Matchを起動した際に表示されるメッセージを停止。",
                "機能毎に指定した測定器を使用するように設定できる機能を追加。",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2022をサポート。",
                "macOS High Sierra (10.13) のサポートを終了。",
                "一部のモニターで調整状態の同期が行えない場合があった問題を修正。",
                "ウィザードを閉じた際にメインウィンドウが表示されない場合があった不具合を修正。",
                " ColorNavigator Networkにて以下の機種をサポート。",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "一部の機種において機種名を正しく取得できない不具合を修正。",
                "軽微な不具合を修正。"
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "ColorNavigator Networkにて一部のColorEdge CSシリーズをサポート。",
                "LogViewLUTエミュレーション機能にて.cube形式のファイルをサポート。",
                "目標ごとの ICC プロファイルポリシー設定をサポート。",
                "一部の環境にてインストール完了後にColorNavigator 7をの起動に失敗する不具合を修正。",
                "TOPCON SR-UL1Rセンサーを認識できない場合があった不具合を修正。"
              ]
            },
            {
              "version": "7.1.3.2",
              "description": [
                "macOS Sierra (10.12) のサポートを終了",
                "CMYK検証時のカラーパッチ表示用ビューアとしてAdobe Photoshop 2021をサポート",
                "CMYK検証時のカラーパッチ表示用ビューアとして以下のサポートを終了",
                "・Photoshop CC 2018",
                "・Photoshop CC 2017",
                "・Photoshop CC 2015.5",
                "・Photoshop CC 2015",
                "・Photoshop CS6",
                "ドッキングステーションやUSB ハブを使用した多階層環境にて、モニターの検出に失敗する不具合を修正"
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "CG3146でのStandardモードキャリブレーションの調整精度向上。",
                "UIを改善。",
                "ColorNavigator Networkから目標ガンマが「LUT」のモニター設定を送信できるように変更。",
                "検証結果が予期しない値になる不具合を修正。"
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・i1Pro 3",
                "サポートセンサーから以下の機種を削除。",
                "・CA-210",
                "Windowsにてi1 Studioの検出に失敗する場合があった不具合を修正。",
                "WindowsにてSpyderX / EX4の検出に失敗する場合があった不具合を修正。"
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "UIを改善。",
                "モニター設定のエクスポートに失敗してしまう場合がある不具合を修正。",
                "WindowsにてCMYK検証を実施する際、ビューアーソフトにAdobe Acrobatを指定すると校正設定ができない不具合を修正。",
                "アプリケーションのヘルプをPDF形式に変更。"
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "サポート機種として以下を追加",
                "・CG3146",
                "・CS2740-X",
                "内蔵センサーのコレレーションに失敗する場合がある不具合を修正",
                "特定のICCプロファイルを読み込んだ場合にアプリケーションが終了してしまう不具合を修正",
                "キャリブレーション中にCN7が不正終了してしまう場合がある不具合を修正",
                "ICCプロファイルの色域情報に書き込む値が適切でない場合がある不具合を修正",
                "サポートセンサーとして以下を追加。",
                "・i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "i1 Display 3/i1 Display Proの測定精度を改善。",
                "macOS Catalina (10.15) にてEX3/Spyder5, K-10/K-10Aに対応"
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "拡張機能「モニター設定のエクスポート/インポート」を使用してモニター設定をインポートすると、目標がリセットされる不具合を修正"
              ]
            },
            {
              "version": "7.0.7.5",
              "description": [
                "macOS  Catalina (10.15)にてi1 Display 3/i1 Display Proが使用できない問題を修正。"
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "データアクセスエラーが発生する不具合を修正。"
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "拡張機能にデバイスエミュレーション、プロファイルエミュレーション機能を追加。(Win/Mac)",
                "UIを改善。"
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "サポートセンサーとして以下の機種を追加。",
                "・SpyderX / EX4",
                "・CA-410",
                "以下の機種において、内蔵センサーコレレーション時における利用可能な測定器の制限を撤廃。",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "Agent起動状態での複数ユーザーの同時利用ができるように修正。(Linux)",
                "ColorNavigator Network接続機能を認証プロキシ下でも使用できるように改善。"
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "拡張機能にモニター設定のエクスポート/インポート機能を追加。",
                "ICCプロファイルを更新できない問題へ対応。",
                "別ユーザーが使用中の場合、エラーメッセージを表示。",
                "Agent起動状態での複数のユーザーの同時利用ができるように修正。",
                "「設定のインポート/エクスポート」を「環境設定のインポート/エクスポート」に変更。",
                "ColorNavigator 6の手動調整結果が引き継がれない問題を修正。",
                "目標エクスポート時のファイル拡張子を修正 (cntarget -> cn7target)。",
                "サポート機種として以下の機種を追加。",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "モニターから目標を正しく読み込めない場合がある問題を修正。",
                "アンインストーラを追加",
                "サポート機種として以下の機種を追加。",
                "・CS2410"
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "Photoshop CC 2019でのCMYK検証に対応。",
                "常駐時にプロファイル設定エラーが繰り返し表示される問題を修正。",
                "サポート機種として以下の機種を追加。",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "UIを改善。",
                "ColorNavigatorから設定したSelfCalibrationの設定がOSDの操作によって置き換わる不具合を修正。",
                "OSDの調整日時がColorNavigatorのメインウィンドウを閉じた時刻になる問題を修正。",
                "調整履歴に結果が重複して表示される問題を修正。"
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "軽微な不具合を修正。",
                "サポート機種として以下の機種を追加。",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "初回リリース"
              ]
            }
          ],
          "zh": [
            {
              "version": "7.2.9.6",
              "description": [
                "支持macOS 27 Golden Gate。",
                "停止支持macOS Ventura 13。"
              ]
            },
            {
              "version": "7.2.9.4",
              "description": [
                "增加支持下记型号显示器：",
                "・CG3200X",
                "改善程序用户界面。"
              ]
            },
            {
              "version": "7.2.8.4",
              "description": [
                "增加支持下记型号显示器：",
                "・CS3200X",
                "改善程序用户界面。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.7.3",
              "description": [
                "Advanced类型的色彩模式校准中支持选择色彩匹配函数（CIE 1931 / CIE 1964，仅限支持的测定器）。",
                "改善应用的用户体验。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.6.5",
              "description": [
                "支持macOS Tahoe (26)。",
                "停止支持macOS Monterey (12)。",
                "支持Photoshop 2026做为CMYK验证用的颜色查看器。"
              ]
            },
            {
              "version": "7.2.5.3",
              "description": [
                "增加支持下记型号显示器：",
                "・CG2400SV",
                "・CG2731-Z",
                "・CG2740-Z",
                "增加支持下记型号测量设备：",
                "・CS-3000 / CS-3000HDR / CS-2000Plus",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.4.6",
              "description": [
                "增加支持下记型号显示器：",
                "・CG3100X",
                "增加支持下记型号测量设备：",
                "・Datacolor Spyder",
                "终止对旧款显示器的支持。",
                "・CX241",
                "・CS240",
                "・CG247",
                "・CX271",
                "・CS270",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.3.6",
              "description": [
                "增加支持下记型号显示器：",
                "·CG2400S",
                "增加支持下记型号测量设备：",
                "・Datacolor SpyderPro",
                "・JETI specbos 2501",
                "支持按照测量设备型号设定测量值补偿种类。(仅支持对象测量设备)",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.2.8",
              "description": [
                "增加支持下记型号显示器：",
                "・PROMINENCE CG1",
                "增加支持下记型号测量设备：",
                "・TOPCON SR-5 / SR-5A",
                "支持macOS Sequoia (15)。",
                "停止支持macOS Big Sur (11)。",
                "支持Photoshop 2025做为CMYK验证用的颜色查看器。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.1.5",
              "description": [
                "增加支持下记型号测量设备：",
                "·EX5",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.2.0.4",
              "description": [
                "新增ColorNavigator API功能。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.14.6",
              "description": [
                "增加支持下记型号测量设备：",
                "・Calibrite Display Plus HL / Calibrite Display Pro HL",
                "支持Photoshop 2024做为CMYK验证用的颜色查看器。",
                "停止支持macOS Catalina (10.15)。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.13.1",
              "description": [
                "增加支持下记型号测量设备：",
                "・SpyderX2"
              ]
            },
            {
              "version": "7.1.12.4",
              "description": [
                "终止对旧款显示器的支持。",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX270",
                "・CX240",
                "新增ColorNavigator API功能（公测版）",
                "修复了从ColorNavigator Network发送的模板名称未被保留的问题。",
                "修复了一些小问题。"
              ]
            },
            {
              "version": "7.1.11.8",
              "description": [
                "增加支持下记型号显示器：",
                "・CS2400R",
                "增加确认ColorNavigator Network的连接设定是否正确的功能。",
                "支持Apple M2 Pro芯片。",
                "修复某些情况下非支持测定器可能被会被使用的错误。",
                "修复读取某些ColorNavigator NX做成的显示器设定文件时程序崩溃的问题。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.10.3",
              "description": [
                "增加支持下记型号显示器：",
                "・CS2400S",
                "增加支持下记型号测量设备：",
                "・Spectraval 1511",
                "支持MYIRO-1的照度测量功能",
                "支持Photoshop 2023做为CMYK验证用的颜色查看器。",
                "停止支持macOS Mojave (10.14)。",
                "终止支持旧测量设备：",
                "・i1Pro / Monitor",
                "・ColorMunki",
                "修复验证结果报告中始终用8位数值表示颜色的问题。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.9.17",
              "description": [
                "终止支持旧测量设备：",
                "・Spyder4 / EX2",
                "・DISCUS",
                "变更预置目标的亮度。",
                "原生支持搭载Apple Silicon芯片的Mac系统。（部分测量设备由于没有原生对应依然采用Rosetta模式）。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.8.8",
              "description": [
                "增加支持使用目标名做为ICC配置文件名的功能。",
                "增加从主窗口删除目标的功能。",
                "改进ColorNavigator Agent的输入信号监视功能。",
                "改善程序用户界面。",
                "修复一些小问题。"
              ]
            },
            {
              "version": "7.1.7.11",
              "description": [
                "增加支持下记型号显示器：",
                "·CG2700S",
                "增加支持下记型号测量设备：",
                "·MYIRO-1 (不支持 macOS 12 (Monterey))",
                "·ColorChecker Display Pro / Plus",
                "·ColorChecker Studio",
                "ColorNavigator Agent状态下，当 Quick Color Match启动时不再显示警告。",
                "增加可以为每种功能指定测量设备的功能。",
                "支持Photoshop 2022做为CMYK验证用的颜色查看器。",
                "停止支持macOS High Sierra (10.13)。",
                "修正部分显示器无法正确同步校正状态的问题。",
                "修正某些向导关闭后主窗口有时没有显示的问题。",
                "ColorNavigator Network里增加支持下列型号：",
                "・CG3146"
              ]
            },
            {
              "version": "7.1.5.1",
              "description": [
                "轻微缺陷的修正。"
              ]
            },
            {
              "version": "7.1.4.17",
              "description": [
                "添加部分ColorEdge CS显示器支持ColorNavigator Network。",
                "LogViewLUT仿真功能中支持.cube文件格式。",
                "支持对各调整目标个别设定ICC profile政策。",
                "修正部分环境下ColorNavigator 7安装后起动失败的问题。",
                "修复不能识别TOPCON SR-UL1R测定器的问题。"
              ]
            },
            {
              "version": "7.1.3.2",
              "description": [
                "停止支持macOS Sierra (10.12)。",
                "支持Photoshop 2021做为CMYK验证用的颜色查看器。",
                "停止支持下列软件做为CMYK验证用的颜色查看器:",
                "・Photoshop CC 2018",
                "・Photoshop CC 2017",
                "・Photoshop CC 2015.5",
                "・Photoshop CC 2015",
                "・Photoshop CS6",
                "修复了在扩展坞或者USB扩展器等多层连接环境下无法检测出显示器的问题。"
              ]
            },
            {
              "version": "7.1.2.7",
              "description": [
                "改善CG3146的Standard Mode校准精度。",
                "改善UI。",
                "支持从ColorNavigator Network设定LUT形式的伽马目标。",
                "修正一些情况下出现非预期验证结果的错误。",
                "修正当应用更新时已安装的语言包被卸载的错误。"
              ]
            },
            {
              "version": "7.1.1.3",
              "description": [
                "增加支持下记型号测量设备：",
                "・i1Pro 3",
                "移除支持下记型号测量设备：",
                "・CA-210",
                "修复某些Windows环境下无法检测出 i1 Studio的错误。",
                "修复某些Windows环境下无法检测出SpyderX / EX4 的错误。"
              ]
            },
            {
              "version": "7.1.0.7",
              "description": [
                "UI改善。",
                "修正某些情况下显示器设定导出错误问题。",
                "修正Windows系统下无法为CMYK验证正确设置Adobe Acrobat的问题。",
                "将软件帮助文档更换为PDF格式。"
              ]
            },
            {
              "version": "7.0.9.13",
              "description": [
                "增加支持下记型号显示器：",
                "·CG3146",
                "·CS2740-X",
                "修正了某些情况下内置传感器相关校正失败的错误。",
                "修正了读取特定ICC配置文件时程序崩溃的错误。",
                "修正了某些情况下调整过程中程序崩溃的错误。",
                "修正了某些场合ICC配置文件色域信息不正确的错误。",
                "增加支持下记型号测量设备：",
                "·i1 Display Pro Plus"
              ]
            },
            {
              "version": "7.0.8.3",
              "description": [
                "改善i1 Display 3/i1 Display Pro的测量精度。",
                "EX3/Spyder5 and K-10/K-10A 支持macOS Catalina (10.15)。"
              ]
            },
            {
              "version": "7.0.7.7",
              "description": [
                "修复使用导出/导入显示器设置扩展功能导入显示器设置时目标被重置的问题。"
              ]
            },
            {
              "version": "7.0.7.5",
              "description": [
                "修正了在macOS Catalina(10.15)系统下i1 Display 3/i1 Display Pro无法使用的问题。"
              ]
            },
            {
              "version": "7.0.7.4",
              "description": [
                "修正某些情况下的数据访问错误。"
              ]
            },
            {
              "version": "7.0.6.8",
              "description": [
                "在扩展功能中增加设备仿真和ICC配置文件仿真功能。(Win/Mac)",
                "用户界面更新。"
              ]
            },
            {
              "version": "7.0.5.11",
              "description": [
                "增加支持以下测量设备",
                "・SpyderX / EX4",
                "・CA-410",
                "移除下列显示器的内置传感器相关校正的参考设备的限制",
                "・CG245W",
                "・CG275W",
                "・CG246",
                "・CG276",
                "・CG247",
                "・CG277",
                "・CG248-4K",
                "・CG318-4K",
                "允许多用户同时使用ColorNavigator7 Agent。(Linux)",
                "支持在使用认证代理网络环境下使用ColorNavigator Network功能。"
              ]
            },
            {
              "version": "7.0.4.12",
              "description": [
                "在扩展功能中追加显示器设定导入/导出功能。",
                "修正某些情况下ICC配置文件不能更新的问题。",
                "当其他用户正在使用本软件时，显示错误信息。",
                "允许多用户同时使用ColorNavigator7 Agent。",
                "“设置的导入/导出”功能更名为“环境设置的导入/导出”。",
                "修正不能正确导入CN6手动调整结果的问题。",
                "修正调整目标导出文件的扩展名 (cntarget ⇒ cn7target)。",
                "追加支持以下型号。",
                "・CS2731"
              ]
            },
            {
              "version": "7.0.3.7",
              "description": [
                "修正部分情况下无法从显示器中正确读取目标的问题",
                "增加自动卸载工具"
              ]
            },
            {
              "version": "7.0.2.7",
              "description": [
                "添加了对Photoshop CC 2019的CMYK验证的支持。",
                "修正了一个程序常驻时反复显示总览设置的错误的问题。",
                "增加支持以下型号。",
                "・CG3145",
                "・CG276",
                "・CG246",
                "・CG275W",
                "・CG245W",
                "・CX271",
                "・CX241",
                "・CX270",
                "・CX240",
                "・CS270",
                "・CS240",
                "・CS230"
              ]
            },
            {
              "version": "7.0.1.9",
              "description": [
                "用户体验改善。",
                "ColorNavigator的SelfCalibration设置有可能被OSD操作更改的问题修正。",
                "ColorNavigator的主窗口的关闭时间被设置为OSD上的调整时间的问题修正。",
                "调整履历里调整结果重复表示的问题修正。"
              ]
            },
            {
              "version": "7.0.1.5",
              "description": [
                "轻微的漏洞修复。",
                "增加支持以下型号。",
                "・CG319X",
                "・CG318-4K",
                "・CG248-4K",
                "・CG277",
                "・CG247X",
                "・CG2730",
                "・CG2420",
                "・CG247",
                "・CS2730",
                "・CS2420"
              ]
            },
            {
              "version": "7.0.0.63",
              "description": [
                "初版发布"
              ]
            }
          ]
        },
        "os": ["macOS 27", "macOS 26", "macOS 15", "macOS 14"]
      }
    }
  }
}
