About Monitor
Information File
|
|
|
The downloaded Monitor Information File includes the information of your monitor.
When your monitor does not support Plug & Play function, this file enables setting suitable resolution and refresh rate for your display.
|
|
|
|
|
|
*About Plug & Play
|
|
When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings.
When your computer system supports Plug & Play, the Display Information File is not required except for installing the Color Profile.
|
|
|
|
(System requirement for Plug & Play)
- The following OS (Operating System) supporting VESA DDC
Windows XP
- Computer (Graphics Board) supporting VESA DDC
- Display Cable supporting VESA DDC
|
|
|
|
NOTE |
|
*
|
Please contact each manufacture (computer, OS, graphics board) to find if your system supports VESA DDC. |
*
|
The following procedure may differ depending on your computer (graphics board). |
|
|
|
*About VESA DDC
|
|
Plug & Play standard for the display settled by VESA
(Video Electronics Standards Association)
|
|
|
|
|
|
|
|
|
|
|
|
For using on Windows XP
*For the system supporting VESA DDC
If your system supports VESA DDC, the monitor is automatically recognized and suitable resolution and refresh rate are selected.
There is no need to install the Monitor Information File except for using the Color Profile.
Settings
Connect the Monitor with the Computer and start Windows XP.
Confirmation
- Click "Start" and select "Control Panel" from "All Programs".
- Click "Appearance and Themes" and click "Display" icon.
- Select "Settings" tab and click "Advanced".
- Select "Monitor" tab and confirm "Plug and Play Monitor" is displayed in the "Monitor type".
*For the system not supporting VESA DDC
Settings
- Start Windows XP.
- Download "Monitor Information File" and copy the extracted files into the hard disk drive or the floppy disk.
- Click "Start" and select "Control Panel" from "All Programs".
- Click "Appearance and Themes" and click "Display" icon.
- Select "Settings" tab and click "Advanced".
- Select "Monitor" tab and click "Properties" of the "Monitor type".
- Select "Driver" tab and click "Update Driver...".
- "Hardware Update Wizard" window is displayed and click "Next" selecting "Install from a list or specific location".
- Select "Don't search. I will choose the driver to install" and click "Next".
- Click "Have Disk...".
- Insert the EIZO Utility Disk into the CD-ROM drive.
- "Install From Disk" windows is displayed and select a CD-ROM drive in the "Copy manufacturer's files from:" section. Click "OK".
- Select a suitable display name from the "Models:" then click "Next".
- An error message window may appear. Click "Continue Anyway" to continue the installation.
- "Completing the Upgrade Wizard" is displayed and click "Finish".
|
|
|
|
|