1.SettingUo

1-1. System Requirements

 The LCD ToneCurve Tuning Utility software operates under the system shown below.

OS Microsoft Windows 98
Microsoft Windows 98 Second Edition
Microsoft Windows 2000
Microsoft Windows Millenium Edition
Microsoft Windows XP Series
Computer IBM PC/AT compatible with Built-in USB
Monitor FlexScan L685EX-M
RadiForce R11, R12, R21, R22

*
The LCD ToneCurve Tuning Utility software does not support operation under multiple monitor environment. The software controls will be activated to the monitor of first detected.

 

1-2. Installing the LCD ToneCurve Tuning Utility

1.
Set up the USB function.

Connect the computer and the monitor with the EIZO USB cable and set up the USB function.

*
Refer to the user's manual of the monitor. for setting up the USB function..

 

2.
Insert the "ToneCurve Tuning Utility Disk" CD-ROM to the CD-ROM drive.

Menu opens automatically.

*
If the menu does not open automatically, select [Start] - [Run]. Click [Browse] and select "setup.exe" of the "ToneCurve Tuning Utility Disk". Click [OK] then the menu starts up.

 

3.
Install the software

Click "Install LCD ToneCurve Tuning Utility" then the setup wizard starts. Follow the instruction of the menu to install the software.

1-3. Uninstalling the LCD ToneCurve Tuning Utility

1.
Select [Start] - [Settings] - [Control Panel] - [Add/ Remove Programs].
2.
Select "LCD ToneCurve Tuning Utility" from the list and click [Remove] to remove the software.